We're offline for a tune-up, we'll be up and running smoothly very soon.
In the meantime, here are some other options available:
Visit an
Advance Auto Parts store
Sign up for
SpeedPerks Rewards
View us on Social Media
Facebook/Twitter/Blog
We appreciate your patience – for your next visit:
15% off
your next purchase.
Some exclusions apply.
Enter coupon code: in shopping cart.
We look forward to serving you,
The Advance Team
-
Unlock your hood by pulling on the hood release located by the front of the driver side door.
-
Find the release near the center of the hood and push up on it to pull up the hood.
-
Prop the hood up in place. The end of the prop is found near the battery and it lays across the front of the hood.
-
This step is only needed if you want to replace the headlight bulb on the driver's side
-
Pull up on the power steering fluid reservoir to take it out of the holder.
-
Set the reservoir to the side to make room near the headlight.
-
This step is only needed if you want to replace the headlight bulb on the passenger's side.
-
Using the 10mm wrench undo the battery tie down by turning the bolt clockwise.
-
Move the battery out of the way of the headlight.
-
Put on a pair of latex or nitrile gloves.
-
Take hold of the headlight plug located directly behind the headlight.
-
Turn the bulb a quarter turn counter-clockwise to unlock it.
-
Pull out the plug.
-
Be careful to not break the bulb when taking out the headlight.
-
Find the release on the lower part of the headlight plug.
-
Push down on the release while pulling on the base of the headlight to remove the headlight bulb.
-
Take the new headlight and plug it into the headlight plug
-
It is important that we wear the gloves and be careful with handling headlights as oils from human skin can easily damage them.
-
Reinsert the plug with the new headlight on it.
-
Turn the plug a quarter turn clockwise to lock it in.
-
Gently tug the plug to make sure it is locked in place. If it isn't, redo this step.
-
If you replaced the driver side headlight, plug the power steering fluid reservoir back in its place.
-
If you replaced the passenger side headlight, put the battery tie down back on by inserting the bolt and turning it counter-clockwise.