Ground hog earth drill for sale

Please note: Please choose your auger bits, they are optional (Not included with the unit)

1M-5CH Earth Drill

The Ground Hog Model 1M-5CH is a rugged and reliable mechanical one-man earth drill that puts the power of our two-man earth drill in the hands of one operator.

The 1M5CH uses the same time-tested transmission as our C-71-5 Two-Man earth drill that has proven to be a reliable performer for over 30 years in the rental and fence industries. The transmission is an efficient worm drive design using heavy duty aluminum castings and large tapered roller bearings as well as our industry standard 7/8” square auger drive.

Power is transferred to the gearbox through an automotive-type tubular driveshaft with heavy duty U-joints and carrier bearings. The 1M-5CH uses heavy duty steel construction throughout and a right angle frame design that minimizes operator fatigue by eliminating torque kick back.

The large pneumatic tires on the 1M-5CH make the unit easy to maneuver around the jobsite whether it be hard ground, loose soil or grass. All of the operator controls are conveniently located at the handlebars and the handlebars can pivot to different positions to allow for normal digging as well as close-up digging allowing you to dig right up next to obstacles such as walls or fences.

The 1M-5CH comes with commercial Honda engine GX160

– Ground Hog’s time tested transmission

– Durable powder coated finish

– Easy to maneuver on rough or soft terrain

– 7/8” square auger drive (No shear pins needed)

– Tubular steel drive shaft

– No torque to operator

– Uses augers up to 12” in diameter

– Large pneumatic wheels and tires

– Low maintenance

– Light Weight

– Easy to load into truck or trailer

– Easy to use operator controls

– Will handle the hardest soils

Shipping dimension 79”L  x 38”W and Height 42”
Weight: 270 lbs

Please note: Please choose your auger bits, they are optional (Not included with the unit)

The Ground Hog C-71-5H is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance.

The heart of this unit is our time-tested transmission. The transmission is an efficient worm drive design utilizing alloy steel shafts, large tapered roller bearings and our standard 7/8” square auger drive.

Aluminum castings are used throughout the C-71-5H's construction to produce a unit that is both strong and lightweight. The C-71-5H uses an air cooled centrifugal clutch and a trigger-type, return-style throttle. Both operator positions are equipped with individual stop switches and tubular steel handlebars.

The C-71-5H comes with Honda GX commercial engine

Shipping: 105 LBS, 32"W X 25"H X32"L