Turning the maintenance light off in a Toyota Tacoma is very easy to do. It will only take 30 seconds to 2 minutes of Your time, in fact. First, You will need to get into the driver's side of Your vehicle, and put Your key in the ignition. Next, being careful not to actually crank the engine, put the ignition in the "on" position. Push down and old the odometer option, while simultaneously flipping the ignition back into the off position. Now, You should be able to start Your engine. The maintenance light should have gone off or disappeared, and is now fully reset.
accountCircle
Bonnie J. July 30, 2020
The following instructions will reset the maintenance light on your toyota tacoma: switch the ignition switch to the "on" spot, but do not start the engine if your car has a start push button, press the "start" button without touching the brake pedal. Briefly click the odometer knob until you see "trip a â». Next, press the "off" ignition and hold the reset trip odometer button, and turn the ignition switch to the "on" position. Continue holding down the reset trip odometer button until the display shows "000000" miles, and the maintenance light turns off.
accountCircle
Bonnie J. April 13, 2020
The following instructions will reset the maintenance light on your toyota tacoma: switch the ignition switch to the "on" spot, but do not start the engine if your car has a start push button, press the "start" button without touching the brake pedal. Briefly click the odometer knob until you see "trip a
The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.
How to reset maintenance light Toyota Camry 2014 Push button start is a bit different from other Camry models without a push button. These steps are valid for all 2014 onward to hybrid push-button start versions. In case you are looking for other procedures without a push-button start then you can find them in the later section of this article.Here is How Reset Maintenance Light Toyota Camry 2014 Push Button Start
How to Turn off Maintenance Light on the Toyota Camry models of 2007 till 2015 on all Camry version except Push Start button.
- Without starting the engine, turn the ignition to the on position.
- Press the odometer button until “TRIP A” appears on the screen.
- Turn the ignition “off”
- Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position.
- Hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.
More: Toyota Sienna Check Engine Light Vsc Trac Off
These steps of How to Turn off Maintenance Light on the Toyota Camry of 2002 till 2007 on all Camry versions.
- Turn the ignition to position On without starting the engine.
- Press the odometer button until you see “ODO”
- Turn the ignition “off”
- Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position.
- Hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.
The Toyota Camry will display a ‘Maintenance Required‘ message to remind you that an oil change is due. Once maintenance service has been performed, you can reset the oil light with these steps. The light will display
again after 5,000 miles. I hope this post has helped you reset the oil maintenance light on your Toyota Camry.2018-2021 Models
2007-2017 Models
1998-2006 Models