Icd 10 for hypertensive heart disease with heart failure

Icd 10 for hypertensive heart disease with heart failure

This Coding Tip was updated on 12/10/2018

CD-10-CM, the word “with” should be interpreted to mean “associated with” or “due to” when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List.  The classification presumes a causal relationship between the two conditions when linked by these terms in the Alphabetic Index or Tabular List.

The word “with” is sequenced immediately following the main term in the Alphabetic Index and not in alphabetical order.

The classification presumes a causal relationship between hypertension and heart involvement and between hypertension and kidney involvement, as the two conditions are linked by the term “with” in the Alphabetic Index. Even in the absence of provider documentation explicitly linking them, these conditions should be coded as related.

Hypertension with heart conditions classified to I50.-or I51.4-I51.9. are assigned a code from category I11, Hypertensive heart disease.  If the provider specifies a different cause then they would be coded separately and not linked. This would be the same if the physician gives another etiology for the CKD. It is an assumed link when NO other cause has been documented.

Example of hypertension and heart involvement:

  • Patient is discharged with final diagnosis of exacerbated CHF, and a secondary diagnosis of hypertension. For this patient, CHF and hypertension would be coded as code I11.0, Hypertensive heart disease with heart failure since the causal relationship is assumed due to the word “with” following the main term in the Alphabetic Index under hypertension.  Since the heart disease falls within the code range of I50.- or I51.4-I51.9 the link would be assumed.  Additional code for the type of heart failure would be assigned as a secondary diagnosis, I50.9.   This was verified at the AHIMA Coding Community meeting in Baltimore, MD on October 15, 2016 by Nelly Leon-Chisen.
  • Patient is discharged with final diagnosis of atherosclerotic heart disease (CAD) with unstable angina and hypertension.  For this patient, the causal relationship would not be linked because the heart disease does not fall within the code range listed for the causal effect to be assumed.  CAD falls within the code range of I25.-.  The code range for the assumed link is I50.- or I51.4-I51.9 only.

References
ICD-10-CM Official Guidelines for Coding and Reporting FY 2019 Page: 12-13
AHA Coding Clinic, Fourth Quarter 2016, Page: 122-123
AHA Coding Clinic, Fourth Quarter 2017 Pages: 84-86
AHA Coding Clinic, First Quarter 2017 Page: 47

The information contained in this coding advice is valid at the time of posting. Viewers are encouraged to research subsequent official guidance in the areas associated with the topic as they can change rapidly.

Icd 10 for hypertensive heart disease with heart failure

Kim Boy, RHIT, CDIP, CCS, CCS-P

Director of Coding Quality Assurance AHIMA Approved ICD-10-CM/PCS Trainer 25 Years Tenure

Cardiology billing and coding comes with unique challenges such as frequent code changes, complex procedure guidelines, and varying payer rules. Knowledge about current cardiology medical billing codes and documentation and compliance updates is essential to report services correctly. ICD-10 offers specific codes that allow providers, staff, and coders to code as specifically as possible.

Causes and Symptoms

Caused mainly by high blood pressure, hypertensive heart disease is the leading cause of death for both men and women in the United States. Hypertensive heart disease is a group of disorders that includes heart failure, left ventricular hypertrophy (thickening of the heart muscle), coronary artery disease, and other conditions.

Symptoms of hypertensive heart disease vary based the severity of the condition and progression of the condition, though some patients experience no symptoms. Common symptoms include high blood pressure, enlarged heart and irregular heartbeat, fluid in the lungs or lower extremities, and unusual heart sounds. Signs that help physicians diagnose the condition include shortness of breath, chest pain (angina),tightness or pressure in the chest, fatigue, chronic cough, pain in the neck, back, arms, or shoulders, leg or ankle swelling, and nausea.

Hypertensive Heart Disease: ICD-10 Coding

ICD-10 presumes a causal relationship between hypertension and heart involvement since the two conditions are linked by the term “with” in the Alphabetic Index. The guidelines state that these conditions should be coded as related even if there is no provider documentation explicitly linking them. For hypertension and conditions not specifically linked by relational terms such as “with,” “associated with” or “due to” in the classification, provider documentation must link the conditions in order to code them as related. On the other hand, if the documentation clearly states the conditions are unrelated, they can be reported separately.

ICD-10 offers specific codes to report hypertensive heart disease and associated conditions.

Hypertension with heart conditions (such as but not limited to: cardiomegaly, heart failure, myocardial degeneration and myocarditis classified to I50. – or I51.4-I51.7, I51.89, I51.9), are assigned a combination code from category I11 – hypertensive heart disease

CategoryI11, Hypertensive heart disease has two codes to indicate if heart failure is present:

I11.0 Hypertensive heart disease with heart failure
I11.9 Hypertensive heart disease without heart failure

A note under I11.0 states: “Use additional code to identify type of heart failure (I50.-).”

The code for systolic heart failure is I50.2 and the code for diastolic heart failure is I50.3-. Combined systolic and diastolic heart failure is coded with I50.4. Fifth characters in the code further specify whether the heart failure is unspecified, acute, chronic or acute on chronic.

  • I50.1, Left ventricular failure, unspecified
  • I50.2, Systolic (congestive) heart failure
  • I50.3, Diastolic (congestive) heart failure
  • I50.4, Combined systolic (congestive) and diastolic (congestive) heart failure

Other heart conditions that have an assumed causal connection to hypertensive heart disease:

  • I50.810, Right heart failure, unspecified
  • I50.811, Acute right heart failure
  • I50.812, Chronic right heart failure
  • I50.813, Acute on chronic right heart failure
  • I50.814, Right heart failure due to left heart failure
  • I50.82Biventricular heart failure
  • I50.83 High output heart failure
  • I50.84, End-stage heart failure
  • I50.89, Other heart failure
  • I50.9, Unspecified

First, report code I11.0, hypertensive heart disease with heart failure as instructed by the note at category I50, heart failure. Report an additional code from category I50- heart failure to specify the type of heart failure. To assign the most specific code from category I50, the documentation needs to indicate the type of heart failure. For example:

  • Congestive heart failure due to hypertension: I11.0 + I50.9
  • Hypertensive heart disease with congestive heart failure: I11.0 + I50.9

A diagnosis of left ventricular, biventricular and end-stage heart failure requires two codes to completely describe the condition: one to identify the left, biventricular or end-stage heart failure, and one to report the type of heart failure.

When the heart condition is unrelated to hypertension: If the provider specifically documents a different cause for the hypertension and the heart condition, the heart condition (I50.-, II51.4-I51.9) and hypertension should be coded separately and the combination code is not used. In such cases, the codes should be sequenced according to the circumstances of the admission/encounter. AAPC provides the following example:

For a patient discharged with a diagnosis of exacerbated chronic diastolic congestive heart failure and a secondary diagnosis of hypertension, the codes to report are:

I11.0 Hypertensive heart disease with heart failure

I50.32 Chronic diastolic (congestive) heart failure

Code Tobacco Use or Exposure: Code tobacco use if documented. An instructional note provided for categories I11 states to use an additional code to identify exposure to environmental tobacco smoke (Z77.22), history of tobacco use (Z87.891), occupational exposure to environmental tobacco smoke (Z57.31), tobacco dependence (F17-) or tobacco use (Z72.0). For example:

I11.0 Hypertensive heart disease with heart failure

I50.32 Chronic diastolic (congestive) heart failure

Z87.891 History of tobacco use

Ensure Proper Clinical Documentation: Good clinical documentation is essential to code to the highest level of patient specificity. The documentation should include the status of the patient and the type of hypertension being treated and findings to support the diagnosis of hypertension and the current manifestations when applicable. Secondary diagnoses, such as systolic/diastolic heart failure and/or chronic kidney disease should be documented. A valid treatment plan should be documented in the form of: medication, referral, diet, monitoring, and/or ordering a diagnostic exam. Appropriate blood pressure targets must be clearly stated in the treatment plan.

Coding for hypertension requires attention to detail and a proper understanding of the ICD-10 guidelines. Medical billing and coding outsourcing to an experienced provider can ensure accurate coding and compliance for accurate claims submission and appropriate reimbursement.

What is the ICD

ICD-10 code I11. 0 for Hypertensive heart disease with heart failure is a medical classification as listed by WHO under the range - Diseases of the circulatory system .

Can you code hypertension and Hypertensive heart disease together?

The combination of hypertension and hypertensive heart disease is currently coded using the ICD-9 402. xx series of codes. As noted earlier, each category is currently divided into malignant, benign, and unspecified essential hypertension with or without heart failure.

What is the ICD

ICD-10 code: I13. 2 Hypertensive heart and renal disease with both (congestive) heart failure and renal failure.

What is the ICD

Assign code I50. 9, heart failure NOS for a diagnosis of congestive heart failure. “Exacerbated” or “Decompensated” heart failure – Coding guidelines advise that “exacerbation” and “decompensation” indicate an acute flare-up of a chronic condition.