Magnavox alarm clock how to set time

Q: How do I set the alarm on my Philips Magnavox?

How to set the clock and alarm on my Philips clock radio?.

Q: How do you change the time on a clock radio?

On the clock radio, press and hold the CLOCK button for 2 seconds. Release the CLOCK button. Press the TIME SET+ or TIME SET- button to select the hour. Press the CLOCK button. ... Note:.

DESCRIPTION Get up and go! You'll be sure not to sleep in with this Philips Magnavox AJ3380 AM/FM Dual Alarm Clock Radio. It's armed with a 24-hour alarm reset, a 59-minute slumber, two independent radio or beeper wake ups, and ten-minute snooze control. There are also fast forward and slow reverse time and alarm settings, a dynamic bass boost, and a large 1.4" green LED display with brightness control. Insert a backup 9V battery, not included, to maintain correct time and alarm settings in the event of a power failure. Measures approximately 8-5/8"W x 4-5/8"H x 4-1/4"D. Weighs 2 lbs. Colour : Black Dark Grey User Manual in PDF will be given in Soft Copy Standard product information Clock/Alarm • Electronic clock • Wake up by radio or buzzer • Alarm • Time/alarm setting Tuner • FM/AM tuning • Wavebands /04 /00, /01 /10 : Dual alarm (radio & buzzer), Slumber function, Repeat alarm (9 minutes) : Fast forward/slow reverse : FM/LW : FM/MW : FM/AM : FM 87.5 - 108 MHz : MW 525 - 1607 kHz : LW 148.5 - 284 kHz : AM 530 - 1710 kHz : 300 m Watts : 76 mm (3") : 1.4" (36 mm) digit height : 24 hours : 12 hours with pm indication : 120/230 V, 50/60 Hz (switchable) : 230V,50Hz : 240V,50Hz : 6F22, 9 V (not included) : Polystyrene : 0.9 Kg : 220 mm W x 107 mm H x 118 mm D : 252 mm W x 134 mm H x 155 mm D : 3 • Frequency ranges Amplifier • Max. output power (RMS) (±1 dB ; D < 10%) Sound System • Loudspeaker Display • Green LED • Clock indication /01, /10 Power Supply • AC mains • Backup battery General /01 /00,/04 /10 • Material •Weight • Dimensions • Packaging dimensions • Quantity /mastercarton Product Highlights • Large Green Display with Brightness Control Large 36 mm display with clock functions that are bigger and brighter for easier viewing. • Wake Up to Radio or Buzzer Gives you the choice of waking up to your favourite radio station or alarm buzzer. • FM/MW or FM/LW Tuner Gives you a wide selection of radio stations to choose from. • Slumber Lets you enjoy up to 59 minutes of radio entertainment while going to sleep. After the pre-set time the radio switches off automatically. • Dynamic Bass Boost Enhances bass tone frequencies to give deep, rich sounds. • Large Green Display with Brightness Control • Battery Back-Up A 9-Volt battery (not included) ensures that clock and alarm settings are maintained in the event of a mains interrupt or failure. Should this happen the display will not illuminate but the alarm and clock settings remain active. • Easy Alarm/Time Set • Radio On/Off Switch Audio, Radio, AM/FM, Clock, Alarm 1, Alarm 2.

ALARM

NOTES:

day

/REPEAT ALARM in TRACK SELECT and CD mode

In standby mode:

- At the set alarm time the normal clock display (standby

mode) is interrupted.

The CD indicator , ' i i o ' - a p p e a r ,

flashes briefly in the display followed by the total number

of tracks and the current track number.

- When

day

/REPEAT ALARM is pressed, the position of the

TRACK SELECT / CD track is memorized and playback stops.

The set goes to standby mode.

— After 9 minutes, the TRACK SELECT / CD track will

resume playback at the point interrupted by

day

/REPEAT

ALARM.

- To cancel the

day

/REPEAT ALARM and return to normal CD

playback, press the PLAY ► button.

During RADIO / CD playback:

Basically the same happens, except that the TRACK SELECT /

first CD track starts from the beginning each time you press

day

/REPEAT ALARM. If you are playing a CD, the current

track will be interrupted at the alarm time and the track

position memorized. Playback from this position will resume

when

day

/REPEAT ALARM is pressed.

Cancelling the alarm completely

• To cancel the set alarm time before it goes off, or during the

alarm call, press the activated ALM1 or 2 button and ■ OFF

simultaneously.

—The alarm indicator will disappear from the display.

WEEKEND SLEEPER

This feature deactivates the alarm every Saturday and Sunday and

resumes the alarm function Monday to Friday. You must set the

day first (see chapter: SETTING THE DAY).

1. Press

day

/REPEAT ALARM once.

— The display will show the set alarm time.

2. Select the alarm you wish to deactivate by pressing the ALM

1 or 2 button. Within the 5 seconds the display shows the set

alarm time, briefly press the WEEKEND SLEEPER once.

— If the weekend sleeper is activated, zz will appear in the

display for ALARM 1 or 2.

3. To cancel the weekend sleeper function, repeat steps 1 and 2

until zz no longer appears in the display.

The person who posted this question about this Magnavox product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.

How do I set the alarm on my Philips Magnavox?

How to set the clock and alarm on my Philips clock radio?.

Turn the clock control to SET TIME or SET ALARM to set the clock or alarm time respectively..

Press HR or MIN repeatedly or hold down the respective button to adjust the hours and minutes. ... .

Release HR or MIN when you reach the correct setting..

How do you change the time on a clock radio?

On the clock radio, press and hold the CLOCK button for 2 seconds. Release the CLOCK button. Press the TIME SET+ or TIME SET- button to select the hour. Press the CLOCK button. ... Note:.