Reset check engine light jeep patriot

Reset oil service light Jeep Patriot. From years: 2008, 2009, 2010, 2011, 2012.

Table of Contents Show

Can I reset check engine light myself?
How do I clear my check engine light without a scanner?
Why is my Jeep Patriot check engine light on?

How do you reset oil service light Jeep Patriot.

Reset CHANgE OIL Message Jeep Patriot. Your vehicle is equipped with an engine oil change indicator system. The “CHANgE OIL” message will flash in the instrument cluster odometer display for approximately 12 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.

Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure:

Turn the ignition switch to the ON/RUN position. Do not start the engine.
Fully depress the accelerator pedal slowly three times within 10 seconds.
Turn the ignition switch to the OFF/LOCK position.

NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.

All information is taken from the Jeep Patriot owners manual.

That it is the full procedure how to reset oil service light Jeep Patriot. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Jeep cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Jeep vehicles.

The CEL came on in my 2016 Patriot. I ran a diagnostic with my OBD code reader and got the code indicating that the air intake manifold control runner is stuck open. I replaced that part and ran another diagnostic to show no codes present but the CEL is still on. So does anyone know the procedure to reset it? TIA

In order to reset the check engine light in a 2016 Jeep Patriot the underlying cause needs to be addressed. You can find out the trouble code causing Your problem by inserting the key into the ignition and turning it to the on position. Next, make sure the trip display is showing the trip mileage. Now hold the trip reset button for about 10 seconds. After the time has expired, cycle the ignition off and on three times. Now the trip display will show You the error codes. The codes will consist of 4 digits beginning with a letter. A simple online search of the code provided to You will help You in diagnosing the issue. After the display shows the error code it will ask if You are sure that You want to reset the code. If You hold the trip reset button for a couple seconds it will clear the code. But again, if the original issue is not addressed the check engine light will come back on.

accountCircle

Joshua S July 16, 2020

To reset the 2016 jeep patriot check engine light you will need a diagnostic tool to connect to the vehicle and proceed to clear the check engine error code manually.

The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided.

Can I reset check engine light myself?

Turning the Ignition On and Off The on-off method is the equivalent fix for a vehicle's check engine light. It forces the computer to refresh its saved state through a reboot. Simply place your key into the ignition and turn it on for 1-2 seconds, then turn it off for 1-2 seconds. Repeat this step three or four times.

How do I clear my check engine light without a scanner?

To reset a check engine light without a scanner, disconnect the negative battery cable and wait a few moments. This will reset the diagnostic system in your vehicle, and if the underlying issue has indeed been resolved, the light should go off immediately.

Why is my Jeep Patriot check engine light on?

Jeep Patriot Check Engine Light Flashing Disparate respectable reasons for a Check Engine Light are faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, or defective spark plugs to name a few.

reset check engine light jeep patriot