Finding that your car won’t start? A dead battery can be a major inconvenience, but less so if you know how to jump-start a car. Thankfully, the experts at Chapel Hill Tire are here to help! The jump-starting process is easier than you might expect; here is a quick guide to jumping
a car battery: Jumping a Dead Car BatteryIf your battery is dead, all you need to get it started is another car to jump your battery and the cables needed to connect them. It is best to always keep a pair of cables in your vehicle in case you or someone else needs a jump. Once you are ready to go with both of these, here is how to jump your car:
Remember, your battery charges while you drive. After getting your car started, consider taking the scenic route to your destination to give your battery the time it needs to recharge. Even if your battery jumps and recharges, this initial dead battery is a sign that you are due for a replacement. Bring your vehicle to a local mechanic at your earliest convenience. Additional Jump-Starting OptionsIf the traditional jump-starting option does not work for you, there are two additional options to getting your battery jumped:
My Car Still Won’t Start After a JumpIf you find that your car still isn’t starting, there may be an issue beyond a dead battery. Here is a closer look at how your battery, alternator, and starter work together. Bring your vehicle in for professional help. The experts at Chapel Hill Tire have everything you need to get your car up and running. With eight Triangle-area locations, you can find our trusted car experts in Raleigh, Durham, Chapel Hill, and Carrboro. Schedule your Chapel Hill Tire appointment to get started today! Back to Resources What are the proper steps for jump starting a car?How to jump start a car. Park. Park the cars close to one another, without touching. ... . Prep. Pop the hoods, and locate the batteries. ... . Attach. Hook the red (+) clamp to the positive terminal of the dead battery. ... . Start 'er up. Start the working car. ... . Remove: Remove the cables in the reverse order you attached them.. Let 'er run.. What is the 5 step process for jumping a battery?5 Steps to Jumpstart your Car!. Start the engine with a working battery. Turn on the engine of a working car and pull it close to the vehicle with the dead battery. ... . Connect the batteries with jumper cables. ... . Start the car. ... . Carefully disconnect two batteries. ... . Inspect the condition of the cables after the jumpstart.. How do you use jumper cables step by step?Attach the red jumper cables first. Start by clamping one red cable to the positive side of the battery that won't start. Then attach the other red clamp to the positive side of the working battery. Next, clamp one black cable to the negative side of the working battery.
|