Male to female luer lock adapter

Specifications & Description

• MaterialNatural/Black PEEK
• Connection Type-Port 1Male luer lock
• Connection Type-Port 2Female 10-32 Coned
• DescriptionThreaded Luer Adapter, Natural/Black PEEK, 0.050" Bore, Male Luer Lock x Female 10-32 Coned; 1/EA

Key Features

• Manufactured from inert polymers
• Male Luer Lock x Female 10-32 Coned
• Lock hub securely holds female luer adapters in place
• 0.050" thru-hole diameter
• Manufactured from PEEK

More About this Item

Quick connect threaded luer adapters are designed to connect any male luer to any female luer in a variety of applications. Male luer fittings are available with or without lock hubs. Lock hubs provide added security of holding the connection in place.

Luer Adapters and Luer Fittings

Connect your Syringe to Pump or Tubing

Whether you're using a syringe to prime a pump, or just need to connect a syringe to a port or tubing, we offer a variety of female luer adapters to connect directly into high or low pressure ports. For more detailed information, check out our blog.

LuerTight™ Fittings

Specifically designed to work in a variety of applications, Luer Lock Adapters form secure connections between a male or female luer. Each of the Luer Adapters we carry at Chrom Tech comes with innovative luer fittings that allow for the quick, secure connection or disconnection from fluoropolymer tubing.

• Reliably hold your fluoropolymer tubing in place with the convenience of a luer connection
• Quick disconnect–no need for barbs or nuts with LuerTight Fittings

Luer-To-MicroTight® Adapter

• Easily connect 360 µm OD tubing to a syringe

The Upchurch Scientific Luer-to-MicroTight Adapter is ideal for infusing samples into lab-on-a-chip devices. These Luer Adapters are made entirely of biocompatible PEEK polymer and introduce only 14 nL of additional volume to the flow path. Use it to directly connect a luer-tip syringe or other product that terminates with a standard male luer to 360 µm OD capillary tubing without tubing sleeves. MicroTight luer fittings are included.

• 

  Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

• 

  …and manufactured with the tight tolerances and premium quality that analysts require. Makes a minimum volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco zero-dead-volume fitting. Made of 300 series stainless steel; stainless steel ferrules included.

• 

  Adapter has a 1/4 " -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration…

• 

  304 Stainless Steel adapter for matching glass beaded process pipe to male NPT fittings, gauges and flanges.

• 

  Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

• 

  Other Notes: The adapter connects a lecture-bottle regulator with a CGA 180 female inlet to a needle valve with 1/4 inch NPT male outlet thread.

• 

  …and high-quality culture media and rinsing fluids. Steritest(R) NEO Device for medical devices provides three adapters: male Luer, female Luer or single needle allow connection to a variety of test devices. A separate vent needle is included for the transfer of the test product, culture media…

• 

  304 Stainless Steel adapter for matching glass beaded process pipe to female NPT fittings, gauges and flanges.

• 

  Our PEEK, Standard, English Threaded Adapter is ideal for bringing together connectors with different threads. The P-653 has a Female 1/4-28 Flat Bottom to Male 10-32 Coned port configuration. It includes no fittings.

• 

  The PhytoMAX-3 hard-T power adapter handles up to 20 Amps and has a locking watertight Female (FF) connection on the main branch a locking watertight Male (MM) and locking watertight Female (FF) connection on the other two sides of the T.

• 

  …PhytoMAX-3 hard-T dimming adapter provides a positive connection for daisy-chaining multiple lights using a single controller for dimming and has a locking watertight Female (FF) connection on the main branch a locking watertight Male (MM) and locking watertight Female (FF) connection on the other…

• 

  Convert Omnifit cap system fittings or 1/4"-28 UNF ports to Luer connectors Cap adapter replaces the colored cap on the cap system fittings and valves to convert it to a male or female Luer connection. The 1/4"-28 UNF adapters fit on 1/4"-28 UNF flat bottom ports of cap system…

• 

  …when metal adapters are mated with plastic male luer lock adapters. Uniquely designed to facilitate easy cleaning and maintenance. Male Luer Lock (MLL) – male luer slip with a threaded sheath for a secure fitting to a female luer lock. Male Luer (ML) – male luer slip that…

• 

  These adapters transition between luer fittings and UNF or NPT threads. Both male and female luer connections are available. All threaded connections are male thread.

• 

  …bushing adapter has a male Ace-Thred connection at bottom and a female NPT thread drilled into the center of the top of the bushing. The top FNPT connection matches male Swagelok fittings and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is…

• 

  304 Stainless Steel NW flange adapters for use with circulators. Connections either terminate in M16x1, M24x1.5, or M30x1.5 male. There is no need for thread sealent or teflon tape. Connections only need to be hand tightened then given a 1/4 turn with a wrench. Compatabile with all circulator…

• 

  …to be installed at the job site. These hoses carry services from the overhead service panel, through the upright of the table and to the shank of the fixture. They consist of either a color coded reinforced PVC. They include two male 3/8" IPS outlet nipples and adapters to attach to the male…

• 

  …female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 3/4"; female NPT with 10°; X 10°; compound angle for PTFE compression fitting used with Lasentec® Probe, and (D) side necks 1/4"; female…

• 

  …female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10; X 10° compound angle for PTFE compression fitting used with Lasentec ®; Probe, and (D) side necks 1/4"; female NPT. Lid…

• 

  … No adapters or special connections On/Off foot switches are compatible with selected dry vacuum pump models. Switches handle up to 15 amps. 1233K59 and 1233K60 comes with a 3-prong U.S. standard plug with 8 ft. cord, CSA, NEMA and UL Enclosure Type 1. 1233K61 comes with male and female IEC…

• 

  …seals. Both male and female couplers have shutoffs. Quick connects provide a easy and convenient way to change out reactor systems or disconnecting hoses. Temperature range is -60 to 200° C. M16 fittings are compatible with the Chemglass ball valves, hoses and adapters. PLEASE NOTE:…

• 

  …vinyl tubing; Luer pipet tip; one tubing clamp; seven polypropylene tubing connectors; and one each of the following: 1/16” , 3/32” and 1/8” bore tubing to male Luer; 1/16”, 3/32” and 1/8” tubing to female Luer and 1/16” to 3/31” bore tubing.

• 

  …you to select and interchange a wide variety of fittings, adapters and tubing, including male and female luers, FEP tubing assemblies, and adapters which thread directly into the valve providing an endless variety of valve configurations for any flow application. Hamilton (HV) fittings and adapters…

• 

  …great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The tapered branch accepts a 40/35 female joint to adapt to microanalysis units. The valve is PVC with a PTFE stopcock. The 3-way PVC valve with PTFE stopcock allows the manifold to be vented to atmosphere when used…

• 

  …female joint to adapt to various microanalysis units. Valves have a PTFE stopcock. Available with 2-way or 3-way valves. Use the 3-way valve when the manifold is used under closed conditions and must be vented to the atmosphere without breaking the vacuum connection. The 3-way valve vent is female…

• 

  …and high-quality culture media and rinsing fluids. The Steritest® NEO Device for medical devices provides three adapters: male Luer, female Luer or single needle allow connection to a variety of test devices. A separate vent needle is used for the transfer of culture media or rinse buffer. The…

• 

  …standard cup accepts a No.8 or 8b stopper to adapt to various microanalysis units. The 3-way valve with PTFE stopcock allows the manifold to be vented to atmosphere when used under closed conditions without breaking the vacuum connection. The valve vent is female luer slip and accepts a disposable…

• 

  …be vented to the atmosphere without breaking the vacuum connection. The 3-way valve vent is female luer slip and accepts a disposable syringe filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The manifold outlet is 1/4"male to hose barb fitting and connects to…

• 

  Eyewash, Faucet Mount, Chrome Plated Brass, adapters include: 55/64in. x 27 Thread (Male), 15/16in. and 13/16in. x 27 Thread (Female), SEI Certified To ANSI Z358.1-2009.

Are Luer lock syringes male or female?

What is Luer lock adapter?

What is female Luer lock?

What is a luer adapter used for?