Snap lock standing seam roll forming machine

Table of Contents Show

• Standard Features
• Specifications
• Profiles & Ribs
• Available Profile List For The SSQII
• Available Rib Rollers For The SSQII
• Available Options For The SSQII
• Additional Options
• Trapezoid Panel
• SSQ275 Profile

• Standard Features
• Specifications
• Profiles & Ribs
• Options
• Brochures
• Manuals
• Trapezoid Panel
• SSQ275 Profile
• Reviews (0)

Standard Features

• Polyurethane Drive Rollers
• Roller System with Shear Dies
• Hydraulic Drive & Shear
• Powder-Coated Frame & Covers
• Welded Tubular Steel Frame
• Push Button RUN/JOG Controls at Entry & Exit Ends
• Power Interruption Safety Circuit
• UL Rated Panels (Must Be Certified by UL for Recognition)
• Industry’s Best Warranty
• Choice of: Quick-ChangeTM Profile Roller System
• Choice of: Quick-ChangeTM Power-Pack (Gas or Electric)
• Choice of: One Pair of Bead, Pencil, Striation or V-Rib Rollers

Specifications

SSQ II Panel Machines

• Length: 15’ 2” (4.6m)
• Width: 5’ (1.5m)
• Height with Over Head Rack: 4’ 5” (1.3m)
• Height without Over Head Rack: 2’ (0.6m)
• Weight: 4,300 lbs. (1,950kg)

SSQ II On Trailer

• Length: 18’ 6” (5.6m)
• Width: 7’ (2.1m)
• Height with Reel: 6’ 5” (2.0m)
• Weight: 5,400 lbs. (2,450kg)

Coil Widths

• 15” to 30” (381mm to 762mm)

Finished Panel Widths

• 12” to 24” (305mm to 610mm) – Note: Variable Depending on Panel Profile

Materials Formed

• Painted Steel: 30 ga. to 22 ga. (0.3mm to 0.8mm) (coated galvanized, aluminized)
• Painted Aluminum: .027” to .040” (0.7mm to 1.0mm)
• Copper: 16 oz. to 20 oz. 3/4 Hard (0.5mm to 0.7mm)
• Terne Coat Stainless: 26 ga. (0.5mm)

Shear

• Hydraulically Powered, Infinitely Adjustable, Hardened Tool Steel Blades & Shear Dies
• Panel Recognition Safety System

Drive

• 16 Polyurethane Drive Rollers, Hydraulically Driven via Chain, Sprocket & Gear

Speed

• 75 ft./min (23m/min) Approx.

Profiles & Ribs

Available Profile List For The SSQII

SSQ100

1” high x 1/2“ wide (25.4mm x 12.7mm) mechanically seamed panel. Includes a hand seamer and clip relief. ~ View Specifications

SSQ200

2” high x 13/16” wide (50.8mm x 20.6mm) mechanically seamed and ARMCO panel. Includes clip relief rollers and hand seamer. ~ View Specifications

SSQ450

1-1/2” high x 1/4” wide (38.1mm x 6.4mm) snap clip panel / snap lock panel. Includes clip relief rollers. ~ View Specifications

SSQ550

1-1/2” high x 7/16” wide (38.1mm x 11.1mm} snap lock panel. The most positive snap engagement available. Includes clip relief. ~ View Specifications

FFQ100

1“ snap seam (25.4mm) with slotted fastener flange for clipless installation. Includes clip relief rollers and automatic “no chip” rotary slotter. ~ View Specifications

T-Panel

1/2” to 2” high (12.7mm to 50.8mm)

• Leg height is profile dependent.
• Most panel profiles can produce a T-Panel. ~ View Specifications

SSQ275

2” high x 13/16” wide (50.8mm x 20.6mm) snap lock / mechanically seamed KBS PROPRIETARY panel. Includes clip relief rollers and hand seamer. ~ View Specifications

FWQ150

1” or 1-1/2” high (25.4mm or 38.1mm) wall / soffit / under-decking panel. Available with optional perforation. ~ View Specifications

SSQ150

1-1/2” high x 1/2” wide (38.1mm x 12.7mm) mechanically seamed panel. Includes a hand seamer and clip relief. ~ View Specifications

SSQ210A

2” high x 13/16” wide (50.8mm x 20.6mm) mechanically seamed and ARMCO panel. Includes clip relief rollers and hand seamer. ~ View Specifications

SSQ450SL

1-1/2” high x 1/4” wide (38.1mm x 6.4mm) snap clip panel / snap lock panel. Includes clip relief rollers. ~ View Specifications

SSQ675

1-3/4” high x 7/16” wide (44.5mm x 11.1mm) snap lock panel. Includes clip relief. ~ View Specifications

FFQ150

1-1/2” snap seam (38.1 mm) with slotted fastener flange for clipless installation. Includes clip relief rollers and automatic “no chip” rotary slotter. ~ View Specifications

TRQ250

2-1/2” high x 13/16” wide (63.5mm x 20.6mm) mechanically seamed Trapezoid panel with anti-capillary leg. Includes hand seamer. ~ View Specifications

FWQ100

1” or 1-1/2” high (25.4mm or 38.1mm) wall / soffit / under-decking panel. Available with optional perforation. ~ View Specifications

These field formed panels have demonstrated compliance with UL580, Class 90 when a UL certificate accompanies the machine producing panel.

* Can make T-Panel
** SSQ275 not available as FREE profile on standard SSQ machine — contact KBS for details.
† Suitable for Zinc
All roller systems include shear dies and clip relief rollers.

• SSQ100, SSQ150 and SSQ450/450SL Roller Systems all use identical left side roller sets.
• FFQ100 and FFQ150 also share identical left side roller sets.
• FWQ100 and FWQ150 also share partial roller sets.

If you purchase or own one of these roller systems, contact Karr’s Building Supply to add any of the other right side systems!

Available Rib Rollers For The SSQII

Options

Available Options For The SSQII

Notched Panel Features

• Notches are punched before the legs are formed for a clean cut
• Finished panel has a 1” (25.4mm) wide strip at each end for hemming
• Punches are hydraulically-powered and computer-controlled
• Notches can be offset for angled cuts
• Snap-seam panels can be made with a profiled flap to be used as a closure

FWQ Flush Wall / Soffit / Underdeck Profile

AVAILABLE NOW for the SSQ II Roof Panel Machine! This unique new flush wall profile is not available on any other portable rollforming machine. It offers easily adjustable reveal from 0″ to 3″. Runs up to 22 gauge. Accommodates Hot Melt Technologies sealant system.

Trailer

NATM Compliant, 12,000 lb. tandem axle trailer used for towing any NTM roofing machine directly to the jobsite. Equipped with crane lifting eyes, 4 drop-foot jack stands and electric brakes w/ breakaway kit.

Machine Cover

Machine Cover K-Tex synthetic canvas material, form fitted to body of machine.

Angled Slitter Features

• Attaches to the exit end of the SSQ II Roof Panel Machine
• Slits any angle from 90° to 35°
• Slits panels up to 24” (610mm) wide

Variable Height Run Out Table – 10-Foot (3m) Sections

Conveyor style table attaches to shear and is used to support panel as it exits the machine. Two individually adjustable legs allow variation in height from 25” to 43”. Available in connectable 10 ft. sections.

Duel Overhead Reel Stand

Machine mount overhead stand for holding up to two Expandable Arbors with coil or two De-coiler Reels with coil for a combined total capacity of 6,000 lbs.

Expandable Arbor

Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.

Single Free Standing De-Coiler

A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Total capacity 3,000 lbs.Shown with optional DR01-EX.

Pencil, Bead, V and Striation Rollers

A variety of ribs used to aesthetically enhance standing seam panels.

NTM200 Controller Features

• 12” (305mm) color touchscreen
• Download from Applicad, TopView, or Excel
• Quickly transfer cut lists from a USB drive
• Notches can be turned on or off, and the offset distance can be specified
• Removable, water-resistant, suitcase-style housing
• Program up to 600 different lengths
• Integrated coil length calculator
• Help and Error screens
• Quick and easy entry from home screen

Computer Control

New Tech Machinery’s new computer controller was developed after years of customer feedback. The controller integrates a myriad of options and features that end users have requested. Operation of the controller is designed for simplicity, with help and error screens to assist the user.

• Water Resistant Carrying Case
• Easy Touch Screen Operation with Adjustable Brightness
• Program up to 99 Jobs or Lengths
• Calibrate on the Fly
• Calibrate using a part run from a programmed job to save coil
• Password protection
• Separate supervisor and user permissions to track machine and coil usage
• Track Material
• Totalizing counter with password protected reset
• Track 3 separate coils differentiated by color with password protection capability
• Integrated Coil Length Calculator
• Measure the coil dimensions and calculate the approximate length
• Auxiliary Shearing
• Help and Error Screens

Improved Look & Operation:

• 12.1” color touch-screen
• Increased memory – program up to 600 different lengths
• Integrated coil length calculator
• Help & Error Screens
• Download from Applicad, TopView or Excel
• Quickly transfer cut lists from a USB drive
• Removable, water resistant, suitcase style housing
• Quick / Easy entry from home screen
• Adjustable articulating arm
• Rotate, raise or lower controller for your perfect view

Quick Change Power Pack

Used to quickly field convert machine from gas engine to electric motor and back again as needed.

Additional Options

Manuals

Trapezoid Panel

The TRQ250 Trapezoid Panel Profile:
A NEW panel for New Tech Machinery, which fits into our SSQ roof panel machine!

• 2.5″ tall structural panel for low slope applications
• Fits in new and existing SSQ roof panel machines (runs up to 22 gauge steel)
• Great for commercial and industrial projects
• Features anti-capillary leg

TRQ250 Load Tables Information

SSQ275 Profile

The SSQ275 NewLock Panel Program:
The KBS Proprietary Panel System that Can Be Snap-Locked OR Seamed!

What is the SSQ275?

The SSQ275 is a 2″ tall panel that combines technology from the 2″ Mechanical Profile and the 1.75″ Snap Lock. Launched at METALCON 2014, our Proprietary Panel System that can be snap-locked or seamed! Karr’s Building Supply (KBS) and manufacturer NTM have partnered, in this new venture! This panel program will include testing and licensing which can be passed on to end-users. We also offer an Installation and Detail Manual for this panel program.

Warranty:

• Three years parts (including electrical) / Three years labor
• Limited lifetime separation on drive rollers
• Limited lifetime on stainless steel forming rollers

Patents:

• U.S. PATENT NO. 5,425,259
• U.S. PATENT NO. 6,981,397
• U.S. PATENT NO. 8,011,218
• U.S. PATENT NO. 8,356,502
• U.S. PATENT NO. 8,468,864
• U.S. PATENT NO. 8,590,354
• U.S. PATENT NO. 9,050,640
• U.S. PATENT(S) PENDING